flooded basement

The wild storms that hit the tri-state area dumped massive amounts of rain into an already floodingsaturated ground. This caused additional flooding of rivers and streams, road closures, and the collapse of many retaining walls because of waterlogged soil. It also left many basements flooded. If you don’t act fast, you could quickly develop a mold problem.

When the rain falls at such a rate, the ground cannot handle the volume and rather than being absorbed, water pools near our homes. This causes many of our basements to flood, which can lead to problems very quickly. Damp and wet areas are prime locations for mold growth, which can blossom within 24-48 hours. Drying out the affected areas as soon as possible is very important.

Here’s what you can do right away to prevent mold:

  1. Mop, vacuum, or pump the water from the area. But be careful if the outside soil is saturated – If you pump out the area too fast, the pressure from the exterior water could damage your basement wall or possibly collapse it.
  2. Remove all wet materials from the area.water damage DC
  3. Dry out residual moisture that is left in the concrete, wood, and other materials. If you have windows that open to the outside, mount fans in them.
  4. Use a dehumidifier and ventilate the area well.
  5. Remove carpeting and dry outside, if possible. If you can’t remove the carpeting, remove as much moisture as possible by using a wet vacuum. Then use fans to circulate air both over and preferably under the carpet. The carpet must be dried within 12 to 24 hours,
    or it will become infested with mold and need to be discarded.

If you are unable to take these steps quickly or are unsure as to whether you already have a mold problem, the best thing to do for the health of your family and your home is to call in a professional to conduct a mold test.